Socket을 처음 발주하시거나 테스트를 처음 의뢰하실 때 자주 문의하시는 여섯 가지를 정리했습니다. 수치는 제조사 ISC의 공개 자료 기준입니다.The six questions first-time buyers ask most. Figures follow the published data of the manufacturer, ISC.
Rubber Socket과 Pogo SocketRubber and pogo sockets
Test Socket은 Tester와 Device를 전기적으로 연결하는 소모성 부품입니다. 사진처럼 Package 밑면의 Ball 하나하나에 Contact해야 합니다. Contact 방식에 따라 두 가지로 나뉩니다.A test socket is the consumable that connects the tester to the device. It has to contact every ball under the package, like the array in this picture. There are two contact technologies.
Rubber SocketRubber socket
Pogo SocketPogo socket
Contact 방식Contact
탄성이 있는 Silicone RubberConductive silicone rubber
Spring이 내장된 금속 Pin (Pogo Pin)Spring-loaded pins (pogo pins)
특징Characteristics
신호 경로가 짧아 High Speed 신호에 유리하고, Ball 손상이 없음Short signal path for high-speed test; no ball damage
Coaxial 구조로 Impedance 정합이 가능해 고주파 RF Test에 사용Coaxial structure allows impedance matching for high-frequency RF test
ISC 제품의 PitchISC pitch
Memory용 0.2 mm부터, System IC용 0.25 mm부터From 0.2 mm (memory), 0.25 mm (system IC)
Pogo 0.4 mm부터, Coaxial 0.7 mm부터Pogo from 0.4 mm, coaxial from 0.7 mm
어느 쪽이 적합한지는 Package와 테스트 조건에 따라 달라집니다. 견적 회신에서 추천 Type과 이유를 함께 안내해 드립니다.Which one fits depends on the package and the test conditions. Our quote tells you which type we recommend and why.
Socket 품명 읽는 법Reading a socket part number
Socket 품명에는 Package 정보가 그대로 들어 있습니다. 334FBGA(12.5X13.5)-0.65P-ASSY를 예로 들면 다음과 같습니다.A socket part number carries the package data. Take 334FBGA(12.5X13.5)-0.65P-ASSY as an example.
334Ball 수ball count
FBGAPackage 종류package type
12.5X13.5Package 크기(가로×세로, mm)body size in mm
0.65PPitch 0.65 mm(인접한 Ball 중심 간 거리)pitch 0.65 mm, the centre-to-centre distance between adjacent balls
ASSY조립 완성품. 단품이면 INSERT 또는 STIFFENER로 표기assembly; single parts read INSERT or STIFFENER
이 품명 한 줄만 보내 주셔도 견적을 진행할 수 있습니다.That one line is enough for us to start a quote.
Socket 세트 구성What is in a socket set
Socket은 역할이 다른 부품으로 구성된 세트입니다. 소모품은 단품으로도 발주하실 수 있습니다.A socket is a set of parts with different functions. The consumable parts can be ordered on their own.
RubberRubberDevice의 Ball과 Board를 연결하는 Contactor. 사용 횟수에 따라 교체하는 소모품the contactor between the device balls and the board; a consumable replaced by insertion count
INSERTDevice를 잡아 Socket 위에 정렬하는 부품holds the device and aligns it over the socket
STIFFENERSocket과 Board의 휨을 방지하는 보강판the backing plate that keeps socket and board from warping
ASSY위 부품을 조립한 완성품the assembled set
르마는 세트와 단품을 모두 공급합니다. 사용 중인 세트의 Rubber만 필요하신 경우 품명을 알려 주시면 견적드리겠습니다.REMA supplies both sets and single parts. If you only need the rubber for a set you already use, send us the part number.
Burn-in Socket 선정Choosing a burn-in socket
Burn-in은 Device를 고온에서 장시간 동작시켜 초기 불량을 선별하는 테스트입니다. ISC Burn-in Socket은 세 종류이며, 대응 Package와 Pitch가 다릅니다.Burn-in runs the device at high temperature for an extended time to screen out early-life failures. ISC offers three burn-in socket types, each with its own packages and pitch.
종류Type
PackagePackage
PitchPitch
High Speed Burn-inHigh-speed burn-in
BGA
0.23 mm부터from 0.23 mm
DC Burn-inDC burn-in
BGA, LGA
0.27 mm부터from 0.27 mm
일반 Burn-inStandard burn-in
BGA, LGA, QFN
0.3 mm부터from 0.3 mm
수명은 테스트 조건에 따라 달라집니다. 온도와 테스트 시간을 알려 주시면 적합한 Type을 추천해 드립니다.Socket life depends on the test conditions. Tell us the temperature and duration and we recommend the type.
견적에 필요한 정보What we need for a quote
아래 여섯 가지를 함께 보내 주시면 가장 빠르게 회신드릴 수 있습니다. 확인이 어려운 항목은 비워 두셔도 됩니다.Send these six together for the fastest reply. Leave blank whatever you do not know yet.
Package 종류 (BGA, LGA, QFN 등)Package type (BGA, LGA, QFN and so on)
Ball 수와 Ball 배열(도면은 NDA 체결 후)Ball count and ball map (drawings only after an NDA)
PitchPitch
Package 크기와 두께Body size and thickness
테스트 조건: 온도, 신호 속도, 전류Test conditions: temperature, signal speed, current
Test Service는 Device, 필요한 테스트 항목, 테스트 조건 세 가지를 기준으로 준비합니다. 확인된 내용만 먼저 보내 주시면 나머지는 첫 회신에서 협의합니다.A test run is planned from three things: the device, the tests you need and the conditions. Send what you have; anything missing is settled in the first reply.
Device와 Package (예: TLC NAND, 316FBGA). 도면은 NDA 체결 후Device and package, for example TLC NAND in 316FBGA (drawings only after an NDA)
테스트 항목: Engineering Test, Burn-in·Reliability Test, Protocol Analysis, Power AnalysisTests needed: engineering test, burn-in and reliability, protocol analysis, power analysis
테스트 조건: 온도 범위, 속도, 전압, 시간Test conditions: temperature range, speed, voltage, duration
샘플 수량과 발송 가능 시점Number of samples and when they can be shipped
회신받으실 내용: 결과 항목, Data 형식, 샘플 반송 여부What you want back: result items, data format, return of samples
해당 Package용 Socket 또는 Board 보유 여부Whether a socket or a board already exists for this package
Test Service는 NAND와 DRAM을 대상으로 합니다. 그 외 Device용으로는 Socket을 공급합니다.The test service covers NAND and DRAM. For other devices we supply the socket.